Steps to use the floor scrubber correctly:
1.Preparation:
Before operation, clear the large debris and obstacles on the ground to ensure that the ground is clean.
If necessary, select the appropriate scrubber or detergent and dilute it according to the manufacturer's recommended ratio.
2.Set up the machine:
Set the appropriate brush disc or bristle type according to the type of scrubber and the characteristics of the ground.
Make sure the water tank and detergent tank are filled with the appropriate amount of water and detergent.
3.Operation:
Operate the scrubber according to the manufacturer's operating manual to ensure that the speed, brush disc pressure and water volume are set correctly.
Move the scrubber at the appropriate speed and sequence to ensure that each area is fully cleaned and avoid repeated cleaning.
4.Clean up residue:
After cleaning, empty and clean the water tank and detergent tank.
Clean and clean the brush disc or bristles to prevent the accumulation of residue.
5.Inspection and maintenance:
Regularly check the various parts of the scrubber, such as brush disc, water-absorbing rubber strip, filter, etc., to ensure that there is no damage or blockage.
Regularly replace parts and maintain lubricating parts according to the maintenance schedule recommended by the manufacturer.
Daily maintenance of the floor scrubber:
1.Keep it clean:
Clean the floor scrubber after each use to avoid accumulation of dirt and chemicals.
Clean and disinfect the water tank and pipe system regularly to prevent bacterial growth.
2.Pay attention to the brush disc or bristles:
Check the wear of the brush disc or bristles regularly, and replace or adjust them in time to maintain the cleaning effect.
3.Check the water-absorbing rubber strip:
Make sure the water-absorbing rubber strip is intact to ensure that the floor scrubber can effectively absorb water and reduce residual moisture on the ground.
4.Maintain the motor and electronic components:
Clean the motor and electronic control components regularly to ensure that they work properly and avoid damage from dust and water.
5.Follow the manufacturer's recommendations:
Operate and maintain according to the manufacturer's maintenance recommendations and operating manual to ensure that the floor scrubber remains efficient and safe throughout its service life.
By following the above guidelines, you can maximize the life of the floor scrubber and ensure that it always performs well in cleaning work.